This website uses some cookies. When continuing your navigation,you accept the cookies use. Warning: blocking some cookies impede the smooth running of the site.
EN

Cutting lines

Fine Titanium Cutting Line

titane_fin.jpg

Tube: Ø60 to Ø219 mm
Max. thickness: 0.9 mm
Materials: Titanium and inconel
Industry: Aeronautics
Semi-automatic line
Micro-lubrication
Tools: HSS blade
Specific features: tube for Airbus A380

This machine has a length adjustment system with digital display. Micro-lubrication eliminates shavings before the blade tooth cuts the material: the material is therefore not deformed.
The blade cuts the tube flush at the chuck jaw (2 mm) to avoid any deformation and take advantage of the rigidity provided by the surrounding chuck jaw.

Automatic stainless steel tube cutting line

tube_inox.jpg

Tube: Ø16 to Ø170 mm
Max. thickness: 1 to 7 mm
Semi-automatic line
Micro-lubrication
Tools: HSS blade
Machine equipped with two cutting heads
Specific features: manufacture of stainless steel fittings

This machine has a length adjustment system using an encoding motor: an arm pushes the tube into the main clamp very precisely (+/- 0.2 mm) through a maximum length of 2 m. Micro-lubrication eliminates shavings before the blade tooth cuts the material: the material is therefore not deformed

Automatic Cutting Line

ligne_auto.jpg

Diameters: Ø12 mm to Ø121 mm
Thickness: 0.9 to 2.5 mm
Materials: rolled, welded and perforated galvanised steel
Production output rate: 3x8

Dual-clamp and dual-blade cutting machine. Automatic feed using a motorised arm with encoder for length adjustment. Output on conveyor belt, with pieces sorted according to cut length. Machine height adjustment table for automatic diameter adjustment. Micro-lubrication

Tube Cutting Machine On Production Line

ligne_fabrication.jpg

Diameters: Ø12 mm to Ø121 mm
Thickness: 2.5 to 7mm
Materials: 304L, 316L
Production output rate: 3x8

Machine built into a longitudinal rolled welded tube production line. The machine follows the tube's feed movement to cut a 6-m length, and then returns to repeat the operation. Machine equipped with two cutting heads. Intensive use in around-the-clock production.

Carbide Pipe Cutting

coupe_carbure_pipe.jpg

Carbide cutting machine with screw-on plates.

Capacity: Ø140 mm to Ø330 mm

Thickness: up to 20 mm

Materials: black steel

Drive system: Hydraulic with spindle
Automatic electric rotation
Pneumatic clamping
Automatic bench height adjustment

Programming via colour touch screeneur.

Composite Tube Cutting Line

coupe_tube_composite.jpg

Project:

Diameters: Ø16 mm to Ø219 mm

Materials: composite tu

Fully automatic and programmable machine with:

  • Tube loading ramp
  • Programming of diameters, length, number of cuts
  • Automatic feed with length adjustment by encoding motor
  • Automatic cutting cycle with diamond blade
  • Lubrication with soluble oil
  • Off-cuts emptied into an external container
  • Hydraulic unit included

Titanium Cutting Line

coupe_titane.jpg

Diameters: Ø5 mm to Ø121 mm
Thickness: 0.4 to 2 mm
Materials: Titanium

Semi-automatic machine: pneumatic automatic clamping, automatic rotation of blade around the tube, but manual penetration.
Micro lubrication system.
Length adjustment stop with digital display.
Concentric clamping system with fast mounting to eliminate distortion of thin tubes.

Filter Tube Cutting Line

tube_filtre.jpg

Diameters: Ø16 mm to Ø170 mm
Materials: stainless steel
Specific features: filter tube: spiral winding of a flat thread on four axial strands

Fully automatic and programmable machine with:

  • Programming of diameters, length, number of cuts
  • Automatic feed with length adjustment by encoding motor
  • Automatic cutting cycle with one blade
  • Micro-lubrication
  • Off-cuts emptied into an external container
  • Hydraulic unit included