In order to answer this question, two important items have to be considered: the right advice and the right preparation. In fact, the main rule of the different services at AXXAIR is based on the support to the customer who wants to choose an automated orbital process rather than to continue with manual welding.
This is the reason why it is preferable to consult our engineers and technicians in order to build a specific project. In this way you will save time and money.
Two aspects have to be considered:
The R&D Department, the technical management and the service department help future customers to consider the whole process and to choose the best equipment according to their applications.
We take into account:
AXXAIR makes welding samples that can be used for XMOS validation tests if required, before the purchase of the equipment. A welding report containing all programs is handed over, with which the customer achieves substantial economies.
A special show room has been equipped for customer and prospects. Here you cannot only attend demonstrations of the entire orbital process including cutting, squaring, bevelling and welding, but also training sessions adapted to our machines. In this way, our customers are assured that the operators will be perfectly trained for the AXXAIR power sources and the various techniques used in the orbital welding processes.
The cost-saving sources for AXXAIR customers can be explained as following:
The more precise is the preparation, the quicker the welder/operator will carry out the task with a high quality result.
The training of the operators on the complete orbital process will save time and improve productivity.
You will only need two or three days on average for fusion welding applications (>3mm wall thickness).
The use of an orbital TIG and automated welding procedure allows you to: