Inline content

Since 1997

Orbital facing


Diameter ø2 - ø8.5

Orbital facing machine : portable, lightweight and designed to be used on site as well as in the workshop.

Tube facing consists in bringing the end of a tube or an accessory into conformity and acts on 3 aspects: the perpendicularity of the tube face (maintenance) - the surface state of the face - a length adjustment.

Burfree facing, the chip unrolls towards the outside of the tube.

Perfect preparation for thin tubes before orbital welding.

Watch the video Technical sheet
Concentric Clamping
HSS TIALN High Quality inserts
Sliding adjustment of tool Holder
Example of machine on bench
Technical characteristics

- Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
- Thickness < 0,12 inches (3 mm) according to material
- Wide range of use with concentric clamping for all diameters
- Ideal tool to face a tube before automatic welding
- Accurate manual advance: 4/1000” (0,1 mm) step graduation
- Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
- 30° and 45° outside bevel possible with optional tool holder
- Squaring and beveling in one operation
- Possibility to use three tools simultaneously
- Minimal straight length of the tube: 2,44 inches (62 mm)
- Delivered in high quality protection case
- Weight: 121 lbs. (55 kg) - Motor 1100W with large speed range (2 gears)
- Screw and wheel drive to optimize the speed range and eliminate vibrations


Download the technical sheet

Find all the technical characteristics of the product

Thanks for download!
If the download doesn't work
click here