3 good reasons for squaring tubes before welding
Squaring of tubes before welding can be interesting for various reasons, and especially for automated or orbital welding applications. Only thin tubes with wall thicknesses no...
Squaring of tubes before welding can be interesting for various reasons, and especially for automated or orbital welding applications. Only thin tubes with wall thicknesses no...
As orbital welding is an automated or robotized process, a precise and repeatable preparation is absolutely necessary.In fact, if the preparations are not precise enough, as for...
It is very important to focus on the squaring of the tubes. Thanks to the portable or fixed machines from AXXAIR, it is easy to bring tubes edges into conformity in an automated...
To bevel a tube means to reduce or to slim down the wall thickness of this tube at its edges. This needs to be done when the wall thickness is of more than 3 millimetres and...
Let us return to the question of the bevel, which will reduce the thickness of the tube in order to allow welding. Generally speaking, a tube with a wall thickness of more than 3...
As the weld pool always tends to go down for reasons of gravity the welding position is an important issue. In orbital welding, the electrode turns around the tube at 360° … so...